CROWN HDPE PNS-4427

PRODUCT DESCRIPTION:

High-Density Polyethylene Pipes (PNS-4427) are for pressure main high-density piping system (ISO) that are chemical resistant with thermal properties, high flow capacity, longer life-cycle, non-corrosive, weather and environmental stress-resistant, tough and flexible. Available as Crown Fuerza PE100 and Crown Sigma PE80.

PRODUCT SPECIFICATION:

HIGH DENSITY POLYETHYLENE (ISO)

NOMINAL SIZE (in)	OUTSIDE DIAMETER (mm)	STANDARD CUTTING LENGTH (m)	SDR 9	SDR 11	SDR 13.6	SDR 17
			PE80 = PN16	PE80 = PN12.5	PE80 = PN10	PE80 = PN8
			PE100 = PN20	PE100 = PN16	PE100 = PN12.5	PE100 = PN10
			THICKNESS (mm)	THICKNESS (mm)	THICKNESS (mm)	THICKNESS (mm)
1/2	20	300	2.3	1.9	1.6	1.2
3/4	25	150	2.8	2.3	1.9	1.5
1	32	100	3.6	3	2.4	2
1 1/4	40	60	4.5	3.7	3	2.4
1 1/2	50	60	5.6	4.6	3.7	3
2	63	60	7.1	5.8	4.7	3.8
2 1/2	75	60	8.4	6.8	5.6	4.5
3	90	6	10.1	8.2	6.7	5.4
4	110	6	12.3	10	8.1	6.6
6	160	6	17.9	14.6	11.8	9.5
8	225	6	25.2	20.5	16.6	13.4
10	280	6	31.3	25.4	20.6	16.6
12	315	6	35.2	28.6	23.2	18.7
14	355	6	39.7	32.2	26.1	21.1
16	400	6	44.7	36.3	29.4	23.7
18	450	6	50.3	40.9	33.1	26.7
20	500	6	55.8	45.4	36.8	29.7
22	560	6	62.5	50.8	41.2	33.2
24	630	6	70.3	57.2	46.3	37.4
28	710	6	79.3	64.5	52.2	42.1
32	800	6	89.5	72.6	58.8	47.4

Compression Fittings for PE PIPES (ISO)

TEE 90 Size (mm)	MALE TEE	FEMALE TEE	TEE REDUCER	END CAP	FEMALE ADAPTER	MALE ADAPTER
20	20 x 1/2 in	20 x 1/2 in	25 x 20	20	20 x 1/2 in	20 x 1/2 in
25	25 x 3/4 in	25 x 3/4 in	32 x 25	25	25 x 3/4 in	25 x 3/4 in
32	32 x 1 in	32 x 1 in	32 x 20	32	32 x 1 in	32 x 1 in
40	40 x 1 1/4 in	40 x 1 1/4	40 x 32	40	40 x 1 1/4	40 x 1 1/4
50	50 x 11/2 in	50 x 1 1/2 in	50 x 25	50	50 x 1 1/2 in	50 x 1 1/2 in
63	63 x 2 in	63 x 2	50 x 20	63	63 x 2	63 x 2
75	75 x 2 1/2 in	75 x 2 1/2 in	50 x 40	75	75 x 2 1/2 in	75 x 2 1/2 in
90	90 x 3 in	90 x 3 in	63 x 50	90	90 x 3 in	90 x 3 in
100	110 x 4 in	110 x 4 in		110	110 x 4 in	110 x 4 in